Gelijke en verminderende T-stukken

Type	Equal / Ongelijk, Straight / verkleinen
Standaard	API 6D, ANSI,MSS ,EN, VANAF, IT, BS, GB,anderen
out Diameter	21.3mm – 1828.8mm
wanddikte	1.8 – 160mm
Staalkwaliteit	A234WPB S275, S275JR, S355JRH, S355J2H WP304, WP304L,WP316, WP316L,WP321 A234 WP11, WP5, WP9, WP91, WP22, WP12, WB36, API 6D: GR B, X42, X46, X56, X60, X65, X70, X80, X100 Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555
Oppervlakte	L555, Coal Tar Epoxy, 3PE, L555, Bitumencoating, L555
Test	Chemische Component Analysis, Mechanische eigenschappen (Ultimate treksterkte, rekgrens, verlenging), technische eigenschappen (Het afvlakken Test, Buigtest, Blow Test, Botsingtest), Oppervlakte Inspectie, Hydrostatische test, X-ray Test.

Stompgelaste Gelijke Tees

MSS SP-75 ANSI B16.9 (in mm) * standaard Wellgrow's.

Outlet dimensie “M” voor run maten 14 en groter is aanbevolen maar niet verplicht.

nominaal			buiten Diameter			Center to End
nominaal			Op Bevel D			Center to End
Buismaat			Op Bevel D
	(NPS)		Rennen	stopcontact		Rennen		stopcontact (1)
	(NPS)		Rennen	stopcontact		C		M
						C		M
1/2	X	1/2	21.3	21.3	25.4		25.4
1/2	X	3/8		17.1			25.4
1/2	X	1/4		13.7			25.4
3/4	X	3/4	26.7	26.7	28.4		28.4
3/4	X	1/2		21.3			28.4
3/4	X	3/8		17.1			28.4
1	X	1	33.4	33.4	38.1		38.1
1	X	3/4		26.7			38.1
1	X	1/2		21.3			38.1
1-1/4	X	1-1/4	42.2	42.2	47.8		47.8
1-1/4	X	1		33.4			47.8
1-1/4	X	3/4		26.7			47.8
1-1/4	X	1/2		21.3			47.8
1-1/2	X	1-1/2	48.3	48.3	57.2		57.2
1-1/2	X	1-1/4		42.2			57.2
1-1/2	X	1		33.4			57.2
1-1/2	X	3/4		26.7			57.2
1-1/2	X	1/2		21.3			57.2
2	X	2	60.3	60.3	63.5		63.5
2	X	1-1/2		48.3			60.5
2	X	1-1/4		42.2			57.2
2	X	1		33.4			50.8
2	X	3/4		26.7			44.4
2	X	1/2*		21.3
2-1/2	X	2-1/2	73.0	73.0	76.2		76.2
2-1/2	X	2		60.3			69.8
2-1/2	X	1-1/2		48.3			66.5
2-1/2	X	1-1/4		42.2			63.5
2-1/2	X	1		33.4			57.2
3	X	3	88.9	88.9	85.9		85.9
3	X	2-1/2		73.0			82.6
3	X	2		60.3			76.2
3	X	1-1/2		48.3			73.2
3	X	1-1/4		42.2			69.8
3	X	1*		33.4
3-1/2	X	3-1/2	101.6	101.6	95.2		95.2
3-1/2	X	3		88.9			91.9
3-1/2	X	2-1/2		73.0			88.9
3-1/2	X	2		60.3			82.6
3-1/2	X	1-1/2		48.3			79.2

	nominaal		buiten Diameter			Center to End
	nominaal		Op Bevel D			Center to End
	Buismaat		Op Bevel D
	(NPS)		Rennen	stopcontact		Rennen		stopcontact (1)
	(NPS)		Rennen	stopcontact		C		M
						C		M
4	X	4	114.3	114.3	104.6		104.6
4	X	3-1/2		101.6			101.6
4	X	3		88.9			98.6
4	X	2-1/2		73.0			95.2
4	X	2		60.3			88.9
4	X	1-1/2		48.3			85.9
4	X	1-1/4		42.2
4	X	1*		33.5
5	X	5	141.3	141.3	124.0		124.0
5	X	4		114.3			117.3
5	X	3-1/2		101.6			114.3
5	X	3		88.9			111.3
5	X	2-1/2		73.0			108.0
5	X	2		60.3			104.6
5	X	1-1/2*		48.3
6	X	6	168.3	168.3	142.7		142.7
6	X	5		141.3			136.7
6	X	4		114.3			130.0
6	X	3-1/2		101.6			127.0
6	X	3		88.9			124.0
6	X	2-1/2		73.0			120.6
6	X	2*		60.3
8	X	8	219.1	219.1	177.8		177.8
8	X	6		168.3			168.1
8	X	5		141.3			162.1
8	X	4		114.3			155.4
8	X	3-1/2		101.6			152.4
8	X	3*		88.9
10	X	10	273.1	273.1	215.9		215.9
10	X	8		219.1			203.2
10	X	6		168.3			193.5
10	X	5		141.3			190.5
10	X	4		114.3			184.2
12	X	12	323.9	323.9	254.0		254.0
12	X	10		273.1			241.3
12	X	8		219.1			228.6
12	X	6		168.3			218.9
12	X	5		141.3			215.9

Stompgelaste Gelijke Tees

MSS SP-75 ANSI B16.9 (in mm) * standaard Wellgrow's.

Outlet dimensie “M” voor run maten 14 en groter is aanbevolen maar niet verplicht.

		nominaal			buiten Diameter		Center to End
		nominaal			Op Bevel D		Center to End
	Buismaat				Op Bevel D
			(NPS)		Rennen	stopcontact	Rennen	stopcontact (1)
			(NPS)		Rennen	stopcontact	C	M
							C	M
14			X	14	355.6	355.6	279.4	279.4
14			X	12		323.9		269.7
14			X	10		273.1		257.0
14			X	8		219.1		247.6
14			X	6		168.3		238.3
16			X	16	406.4	406.4	304.8	304.8
16			X	14		355.6		304.8
16			X	12		323.9		295.1
16			X	10		273.1		282.4
16			X	8		219.1		373.0
16			X	6		168.3		263.7
18			X	18	457.2	457.2	342.9	342.9
18			X	16		406.4		330.2
18			X	14		355.6		330.2
18			X	12		323.9		320.5
18			X	10		273.1		307.8
18			X	8		219.1		298.4
20			X	20	508.0	508.0	381.0	381.0
20			X	18		457.2		369.3
20			X	16		406.4		355.6
20			X	14		355.6		355.6
20			X	12		323.9		345.9
20			X	10		273.1		333.2
20			X	8		219.1		323.8
22			X	22	558.8	558.8	419.1	419.1
22			X	20		508.0		406.4
22			X	18		457.2		393.7
22			X	16		406.4		381.0
22			X	14		355.6		381.0
22			X	12		323.9		371.3
22			X	10		273.1		358.6
24			X	24	609.6	609.6	431.8	431.8
24			X	22		558.8		431.8
24			X	20		508.0		431.8
24			X	18		457.2		419.1
24			X	16		406.4		406.4
24			X	14		355.6		406.4
24			X	12		323.9		396.7
24			X	10		273.1		384.0
26			X	26	660.4	660.4	495.3	495.3
26			X	24		609.6		482.6

	nominaal		buiten Diameter		Center to End
	nominaal		Op Bevel D		Center to End
	Buismaat		Op Bevel D
	Buismaat				Rennen	stopcontact (1)
	(NPS)		Rennen	stopcontact	Rennen	stopcontact (1)
	(NPS)		Rennen	stopcontact	C	M
					C	M
26	X	22		558.8		469.9
26	X	20		508.0		457.2
26	X	18		457.2		444.5
26	X	16		406.4		431.8
26	X	14		355.6		431.8
26	X	12		323.1		422.1
28	X	28	711.2	711.2	520.7	520.7
28	X	26		660.4		520.7
28	X	24		609.6		508.0
28	X	22		558.8		495.3
28	X	20		508.0		482.6
28	X	18		457.2		469.9
28	X	16		406.4		457.2
28	X	14		355.6		457.2
28	X	12		323.1		447.5
30	X	30	762.0	762.0	558.8	558.8
30	X	28		711.2		546.1
30	X	26		660.4		546.1
30	X	24		609.6		533.4
30	X	22		558.8		520.7
30	X	20		508.0		508.0
30	X	18		457.2		495.3
30	X	16		406.4		482.6
30	X	14		355.6		482.6
30	X	12		323.9		472.6
30	X	10		273.1		460.2
32	X	32	812.8	812.8	596.9	596.9
32	X	30		762.0		584.2
32	X	28		711.2		571.5
32	X	26		660.4		571.5
32	X	24		609.6		558.8
32	X	22		558.8		546.1
32	X	20		508.0		533.4
32	X	18		457.2		520.7
32	X	16		406.4		508.0
32	X	14		355.6		508.0
34	X	34	863.6	863.6	635.0	635.0
34	X	32		812.8		622.3
34	X	30		762.0		609.6
34	X	28		711.2		596.9
34	X	26		660.4		596.9

Stompgelaste Gelijke Tees

MSS SP-75 ANSI B16.9 (in mm) * standaard Wellgrow's.

Outlet dimensie “M” voor run maten 14 en groter is aanbevolen maar niet verplicht.

		nominaal			Buiten Diameter		Center to End
					Buiten Diameter
					Op Bevel D
	Buismaat				Op Bevel D
			(NPS)		Rennen	stopcontact	Rennen	stopcontact (1)
			(NPS)		Rennen	stopcontact	C	M
							C	M
34			X	24		609.6		584.2
34			X	24		609.6		584.2
34			X	22		558.8		571.5
34			X	20		508.0		558.8
34			X	18		457.2		546.1
34			X	18		457.2		546.1
34			X	16		406.4		533.4
36			X	36	914.4	914.4	673.1	673.1
36			X	34		863.6		660.4
36			X	34		863.6		660.4
36			X	32		812.8		647.7
36			X	30		762.0		635.0
36			X	28		711.2		622.3
36			X	28		711.2		622.3
36			X	26		660.4		622.3
36			X	24		609.6		609.6
36			X	22		558.8		596.9
36			X	22		558.8		596.9
36			X	20		508.0		584.2
36			X	18		457.2		571.5
36			X	16		406.4		558.8
36			X	16		406.4		558.8
38			X	38	965.2	965.2	711.2	711.2
38			X	36		914.4		711.2
38			X	34		863.6		698.5
38			X	34		863.6		698.5
38			X	32		812.8		685.8
38			X	30		762.0		673.1
38			X	28		711.2		647.7
38			X	28		711.2		647.7
38			X	26		660.4		647.7
38			X	24		609.6		635.0
38			X	22		558.8		622.3
38			X	22		558.8		622.3
38			X	20		508.0		609.6
38			X	18		457.2		596.9
40			X	40	1016.0	1016.0	749.3	749.3
40			X	40	1016.0	1016.0	749.3	749.3
40			X	38		965.2		749.3
40			X	36		914.4		736.6
40			X	34		863.6		723.9
40			X	34		863.6		723.9
40			X	32		812.8		711.2
40			X	30		762.0		698.5
40			X	28		711.2		673.1
40			X	28		711.2		673.1
40			X	26		660.4		673.1
40			X	24		609.6		660.4
40			X	22		558.8		647.7
40			X	22		558.8		647.7
40			X	20		508.0		635.0
40			X	18		457.2		622.3
42			X	42	1066.8	1066.8	762.0	711.2
42			X	42	1066.8	1066.8	762.0	711.2
42			X	40		1016.0		711.2

	nominaal		buiten Diameter		Center to End
	nominaal		Op Bevel D		Center to End
	Buismaat		Op Bevel D
	(NPS)		Rennen	stopcontact	Rennen	stopcontact (1)
	(NPS)		Rennen	stopcontact	C	M
					C	M
42	X	38		965.2		711.2
42	X	36		914.4		711.2
42	X	34		863.6		711.2
42	X	32		812.8		711.2
42	X	30		762.0		711.2
42	X	28	1066.8	711.2	762.0	698.5
42	X	26		660.4		698.5
42	X	24		609.6		660.4
42	X	22		558.8		660.4
42	X	20		508.0		660.4
42	X	18		457.2		647.7
42	X	16		406.4		635.0
44	X	44	1117.6	1117.6	812.8	762.0
44	X	42		1066.8		762.0
44	X	40		1016.0		749.3
44	X	38		965.2		736.6
44	X	36		914.4		723.9
44	X	34		863.6		723.9
44	X	32		812.8		711.2
44	X	30		762.0		711.2
44	X	28		711.2		698.5
44	X	26		660.4		698.5
44	X	24		609.6		698.5
44	X	22		558.8		685.8
44	X	20		508.0		685.8
46	X	46	1168.4	1168.4	850.9	800.1
46	X	44		1117.6		800.1
46	X	42		1066.8		787.4
46	X	40		1016.0		774.7
46	X	38		965.2		762.0
46	X	36		914.4		762.0
46	X	34		863.6		749.3
46	X	32		812.8		749.3
46	X	30		762.0		736.6
46	X	28		711.2		736.6
46	X	26		660.4		736.6
46	X	24		609.6		723.9
46	X	20*		508.0		723.9
48	X	48	1219.2	1219.2	889.0	838.2
48	X	46		1168.4		838.2
48	X	44		1117.6		838.2

Stompgelaste Gelijke Tees

MSS SP-75 ANSI B16.9 (in mm) * standaard Wellgrow's.

Outlet dimensie “M” voor run maten 14 en groter is aanbevolen maar niet verplicht.

		nominaal			buiten Diameter		Center to End
					buiten Diameter
					Op Bevel D
	Buismaat				Op Bevel D
			(NPS)		Rennen	stopcontact	Rennen	stopcontact (1)
			(NPS)		Rennen	stopcontact	C	M
							C	M
48			X	42		1066.8		812.8
48			X	42		1066.8		812.8
48			X	40		1016.0		812.8
48			X	38		965.2		812.8
48			X	36		914.4		787.4
48			X	36		914.4		787.4
48			X	34		863.6		787.4
48			X	32	1219.2	812.8	889.0	787.4
48			X	44		1117.6		838.2
48			X	44		1117.6		838.2
48			X	42		1066.8		812.8
48			X	40		1016.0		812.8
48			X	38		965.2		812.8
48			X	38		965.2		812.8
48			X	36		914.4		787.4
48			X	34		863.6		787.4
48			X	32		812.8		787.4
48			X	32		812.8		787.4
48			X	30		762.0		762.0
48			X	28		711.2		762.0
48			X	26		660.4		762.0
48			X	26		660.4		762.0
48			X	24		609.6		736.6
48			X	22		558.8		736.6
52			X	52*	1320.8	1320.8	965.2	914.4
52			X	52*	1320.8	1320.8	965.2	914.4
52			X	48*		1219.2		863.6
52			X	44*		1117.6		812.8
52			X	40*		1016.0		762.0
52			X	40*		1016.0		762.0
54			X	54*	1371.6	1371.6	1003.3	952.5
54			X	52*		1320.8		914.4
54			X	48*		1219.2		863.6
54			X	48*		1219.2		863.6
54			X	44*		1117.6		863.6
54			X	40*		1016.0		812.8
54			X	28*		711.2		787.4
54			X	28*		711.2		787.4
54			X	20*		508.0		787.4
56			X	56*	1422.4	1422.4	1041.4	965.2
56			X	52*		1320.8		914.4
56			X	52*		1320.8		914.4
56			X	48*		1219.2		863.6
56			X	44*		1117.6		812.8
56			X	40*		1016.0		812.8
56			X	40*		1016.0		812.8
56			X	28*		711.2		812.8
56			X	20*		508.0		812.8
60			X	60*	1524.0	1524.0	1117.6	1016.0
60			X	60*	1524.0	1524.0	1117.6	1016.0
60			X	56*		1422.4		965.2
60			X	52*		1320.8		914.4
60			X	48*		1219.2		863.6
60			X	48*		1219.2		863.6

	nominaal		buiten Diameter		Center to End
	nominaal		Op Bevel D		Center to End
	Buismaat		Op Bevel D
	(NPS)		Rennen	stopcontact	Rennen	stopcontact (1)
	(NPS)		Rennen	stopcontact	C	M
					C	M
60	X	40*		1016.0		863.6
60	X	28*		711.2		863.6
60	X	20*		508.0		863.6
64	X	64*	1626.0	1626.0	1194.0	1092.0
64	X	60*		1524.0		1067.0
64	X	56*		1422.0		1016.0
64	X	52*		1321.0		965.0
64	X	48*		1219.0		914
66	X	66*	1676.4	1676.4	1219.2	1066.8
68	X	68*	1727.0	1727.0	1270.0	1168.0
68	X	64*		1626.0		1143.0
68	X	60*		1524.0		1118.0
68	X	56*		1422.0		1067.0
68	X	52*		1321.0		1016.0
68	X	48*		1219.0		965.0
72	X	72*	1829.0	1829.0	1320.0	1245.0
72	X	68*		1727.0		1219.0
72	X	64*		1626.0		1194.0
72	X	60*		1524.0		1168.0
72	X	56*	1829.0	1422.0	1320.0	1118.0
72	X	52*		1321.0		1067.0
72	X	48*		1219.0		1016.0
76	X	76*	1930.0	1930.0	1422.0	1320.0
76	X	72*		1829.0		1295.0
76	X	68*		1727.0		1270.0
76	X	64*		1626.0		1245.0
76	X	60*		1524.0		1219.0
76	X	56*		1422.0		1168.0
76	X	52*		1321.0		1118.0
76	X	48*		1219.0		1067.0
80	X	80*	2032.0	2032.0	1499.0	1397.0
80	X	76*		1930.0		1372.0
80	X	72*		1829.0		1346.0
80	X	68*		1727.0		1321.0
80	X	64*		1626.0		1295.0
80	X	60*		1524.0		1270.0
80	X	56*		1422.0		1219.0
80	X	52*		1321.0		1168.0
80	X	48*		1219.0		1118.0

Stompgelaste Gelijke Tees

Stompgelaste Gelijke Tees

Stompgelaste Gelijke Tees

Stompgelaste Gelijke Tees

gerelateerde berichten

Laat een antwoord achter annuleer antwoord