The manual concrete placing boom is a new product developed to expand the concrete pouring range and improve the mechanization level of pumping construction. It is an auxiliary equipment for concrete pump, which is connected with concrete pump to expand the concrete pumping range. It effectively solves the problem of wall-casting fabrics and plays an important role in improving construction efficiency and reducing labor intensity.
The fabric machine has reasonable design, stable and reliable structure, and adopts 360° full-rotation boom-type cloth structure. The whole machine is easy to operate and flexible in rotation, and has the characteristics of high efficiency, energy saving, economy and practicality.
Because electric concrete placing booms are much more expensive than manual concrete placing booms , they are not widely used.
In the severe weather of 5 or more winds, thunderstorms, heavy snow, heavy fog, etc. , the construction work of the concrete placing boom should be stopped and anti-overturning measures should be taken. The Municipal Construction and Construction Committee’s supervision on concrete has even extended to the safety of equipment use. The reporter was informed yesterday from the Municipal Housing Construction Committee that the ” Interim Measures for the Administration of the Safe Use of Concrete Construction Machines in Beijing ” has been released recently and will be implemented on December 1.
This kind of ” distributing machine ” is not a weaving machine that weaves warp and weft in the vertical and horizontal direction, but a device commonly used for high-rise pouring in the concrete construction industry. From a distance, it is like a miniature tower crane. The bottom also has a steel frame. The steel frame and the storage hopper are hung on the steel frame in the air. The construction personnel control the position at the bottom and pour the concrete to the designated place.
The “Interim Measures for the Safe Use of Management” issued by the Municipal Housing Construction Committee requires that the construction of the concrete placing boom should be stopped and the anti-overturning measures should be taken in the bad weather such as high winds, thunderstorms, heavy snow and heavy fog above level 5 . In the case of equipment inspection, repair and maintenance, it shall be shut down and powered off. The operation, maintenance and maintenance of the hydraulic spreader shall be handled by a special person.
In addition, this approach also requires, fabric machine each installation, removal, displacement process, the general contractor should be full-time security staff throughout the next station supervision to ensure construction safety. After each shift of the concrete placing boom , the general contractor will check and fill out a ” Concrete Dispenser Shift Checklist” that even checks whether each wire is safe . It can be put into use after passing the test.
Which market factor currently affects the market for the machine? The long-term production development process of the manual concrete placing boom manufacturer Taichang adheres to the market-oriented, and produces the product supply market that meets the market requirements and supplies all walks of life.
First, in terms of internal factors, economic succession runs above the latent growth rate, and the inflationary pressure measured by CPI and PPI is inherited. In order to overcome the overheating of the economy, the tightening is still the main tone of the policy. However, if the policy strength does not inherit significantly beyond expectations, The market will be a positive factor. The incentives for a sharp reversal of the market are three. First, the previous decline was due to the market’s excessive reaction to various policy bearishes, and the marginal effect of policy bearishness diminishes. Once the policy vacuum period is encountered, the market can be restored. Second, the credit increase is better than expected.
Second, external factors. The US GDP growth in the first quarter was 3.2%, and the growth rate was lower than that in the fourth quarter of last year. However, personal consumption has once again become the main driving force for the US economic growth. This shows that the internal driving force of the US economic power has been stimulated by policies. The replenishment of stocks gradually transitions to personal consumption demand. The US economic recovery is better than the European economy and European debt problems will continue to plague the market. The US dollar index will remain strong, the bulk of the commodity market will increase, and the relevant market sector trend opportunities should be small.
With regard to the above two factors, an internal factor and an external factor have seriously affected the development of the distributor market. Therefore, we must pay attention to the changes in the market during the continuous development process, and adjust our own development pace according to market changes. It is a scientific and effective development path!